Without Communication Processor (on Ethernet or COM1 connector)
|
| All the following communication protocols are pre-installed and can be used after the corresponding choise in Toptouch software:
|
|
| Protocols |
COM1 |
COM2 |
LAN |
Type |
Mode |
Siemens Ethernet/IP
(Simatic S7-300/400/1200/CP343) |
|
|
*
|
|
Client |
| Rockwell Ethernet/IP (SLC500 Series) |
|
|
*
|
|
Client |
Rockwell CIP-Ethernet/IP
(CompactLogix - ControlLogix Series) |
|
|
*
|
|
Client |
Omron FINS TCP/IP Ethernet
|
|
|
*
|
|
Client |
MODBUS TCP/IP Ethernet
|
|
|
*
|
|
Client |
MODBUS RTU - RS232
|
*
|
|
|
Point to Point |
Master |
Schneider Unitelway - RS232
|
*
|
|
|
Point to Point |
Slave |
Omron SYSMAC C (Hostlink) - RS232
|
*
|
|
|
Point to Point |
Master |
|
COM1 port is used only by RS232 protocols. They don't need any communication module and use the direct connection to Panel PC DB9 connector.
|
|
|
With Communication Processor (on COM2 connector)
|
|
All the following communication protocols need a Communication Processor inside the Panel PC:
|
|
| Protocols |
COM1 |
COM2 |
LAN |
Type |
Mode |
| Siemens MPI (Simatic S7-300/400) |
|
*
|
|
Multipoint |
Slave |
| Siemens PPI (Simatic S7-200) |
|
*
|
|
Point to Point |
Slave |
MODBUS RTU - RS485
|
|
*
|
|
Multipoint |
Master |
MODBUS RTU - RS422
|
|
*
|
|
Multipoint |
Master |
|
Schneider Unitelway - RS485
|
|
*
|
|
Multipoint |
Slave |
Danfoss FC - RS485
|
|
*
|
|
Multipoint |
Master |
PROFIBUS
(external adapter: Hilscher NL50-MPI)
|
|
|
*
|
Multipoint |
Slave |
Rockwell DeviceNet
(external adapter: ADF Web HD67043-A1)
|
|
|
*
|
Multipoint |
Slave |
CANopen
(external adapter: Hilscher PKV30-COS)
|
|
|
*
|
Multipoint |
Slave |
|
Only one Communication Processor for Panel can be installed.
The Panel PC ordering code must contain the desired Communication
Processor.
(to have the correct ordering code, please go to: http://www.artecnica.net/panelCFG.aspx)
|
|
Notes:
- Ethernet protocols need an Ethernet cable, compatible to tha
IEEE802.3 standard . It is possible to connect more than 1 device on the
same Ethernet by using an Hub/Switch.
- It is possible to connect more than one device on the same Bus if they've got RS485 o RS422 interfaces.
- The Runtime can manage up to 16 prococols at the same time: it can communicate to 16 devices (PLC o I/O) at the same time.
|
|
|
|
|